Air Duct Cleaning in Seattle, WA
Enhance Your Indoor Air Quality
Seattle homes spend a lot of the year closed up. From the first cold rain in October until the long dry days of July, windows stay shut and the furnace or heat pump does most of the breathing for the house. Every cycle pulls air through the return vents, sends it past the filter and blower, and pushes it back into your rooms through the supply ducts. Whatever has collected inside that ductwork goes along for the ride.
Pro Chimney & Air cleans air ducts for houses and townhomes across Seattle and South King County, including Renton, Tukwila, Burien and Kent. We clean the whole system, supply and return, keep it under negative pressure while we work, and show you what came out before we leave.
Call (866) 902-6144 to schedule air duct cleaning in Seattle.
Quick answers
- What we clean: supply runs, return runs, trunk lines, registers and grilles, the return plenum and, where accessible, the blower compartment.
- How we clean: mechanical agitation (brushes, air whips and air skippers) combined with high-powered vacuum collection, so debris leaves the system instead of floating into your home.
- How long it takes: most single-system homes take a few hours. Larger homes or two systems take longer.
- Price: based on the number of vents, returns and systems. You get the full price before we begin.
- Who we serve: Seattle, Renton, Tukwila, Burien, SeaTac, Skyway, Kent, Des Moines and nearby communities in King County.
Why Seattle ductwork collects what it does
Every city’s ducts tell a different story. In the Seattle area, these are the conditions we see behind the vents most often.Long heating seasons
Western Washington heats for much of the year. A forced-air system that runs from fall through late spring moves an enormous volume of air, and every pass deposits a little more dust, lint and fiber on the duct walls. The longer the season, the faster the buildup.Wildfire smoke summers
Recent summers have brought days of heavy wildfire smoke to Puget Sound. Many homeowners close up and run the system to filter the air, which is the right move, but fine ash and soot that make it past a basic filter can settle in the ductwork. If your vents smelled smoky long after the smoke cleared, that residue is a likely reason.Damp air and crawlspaces
Seattle’s humidity and the region’s many crawlspace homes create a setting where moisture can find its way into ductwork, especially ducts that run under the floor or through unconditioned spaces. Moisture makes dust cling and can lead to musty odors. Duct cleaning removes the debris, but if we see signs of water getting in, we’ll show you where so it can be repaired.Older homes, newer equipment
Craftsman homes in Ballard, Wallingford and Beacon Hill, and mid-century ramblers in Lake City and Burien, often have ducts that date back to an old oil or gravity furnace. Many have since been switched to a gas furnace or heat pump while keeping the original ductwork. Old metal ducts, patched joints and decades of buildup are common, and they’re exactly where a thorough cleaning helps most.Trees and pollen
The Northwest’s evergreen and deciduous trees release pollen for months, and cottonwood fluff drifts across the region in early summer. Pollen and plant debris come in through doors and open windows and end up pulled into returns.Remodels and new townhomes
Seattle has seen a lot of new townhome construction and home renovations. Drywall dust, sawdust and insulation from those projects travel through the system quickly. New builds that ran the HVAC system during construction often have a surprising amount of debris in brand-new ducts.Signs your Seattle home’s ducts need attention
You don’t need a camera inspection to suspect a dirty system. Watch for these:- Dust reappears on shelves and screens within a day or two of cleaning.
- You see a gray or black film on register covers, or dark streaks on the ceiling around a supply vent.
- A musty, smoky or stale smell appears each time the furnace or heat pump kicks on.
- Some rooms get noticeably less airflow than they used to.
- Allergy symptoms seem worse indoors than outdoors.
- You’ve just finished a remodel, or moved into a home where the last cleaning is a mystery.
- You find pet hair, insects or debris inside the return grille.
- The filter clogs much faster than its rated life.
What’s included in our Seattle air duct cleaning
We believe a duct cleaning should be defined in writing before the work starts. A standard Pro Chimney & Air residential cleaning covers: Supply ducts and registers. Every supply run is cleaned from the register back toward the trunk line, and the register covers are removed and cleaned. Return ducts and grilles. Returns pull air back to the system and are usually the dirtiest part of the network. We clean the return grilles, the return runs and the return plenum. Trunk lines. The large main ducts that feed the branch runs get agitated and vacuumed along their accessible length. Blower compartment, where accessible. Dust on the blower and its housing gets pushed straight into the ductwork. We clean the accessible areas of the compartment and let you know if a full HVAC service is needed for the blower wheel or coil. Filter check. We confirm the filter size and type, replace it if you have a new one on hand, and recommend a schedule. Results review. At the end of the visit, your technician goes over the findings with you. Optional add-ons include dryer vent cleaning, chimney cleaning and cleaning a second HVAC system.Our process, step by step
1. A look before the quote
We start by removing a few covers and looking into the ductwork, then count the supply vents and returns and find the furnace or air handler. The quote is based on your real system, not a guess from the square footage.2. Protecting your home
We lay floor runners along our path and cover furniture near the registers and the furnace. Shoes stay clean, and so do your carpets.3. Setting up negative pressure
A high-powered collection system is connected to the ductwork. It creates negative pressure across the system, so as we loosen debris, the airflow carries it toward the collector rather than into your rooms. Registers we aren’t working on are sealed to keep the pull strong.4. Agitating each run
Our technicians feed rotating brushes, air whips and air skippers through each run. These tools knock debris loose from the duct walls, including the corners and seams where it packs in. We move methodically from the farthest runs toward the collection point.5. Returns and trunk lines
The returns and main trunk lines get the same treatment. Because return air is pulled across carpets, pet beds and doorways, this is where we usually find the heaviest buildup.6. Registers and grilles
Covers are washed or wiped and reinstalled. If any are damaged or rusted, we’ll let you know.7. Final check and walkthrough
We test airflow at the registers, reconnect the system and run it to make sure everything works. Then we review the results with you and leave the work area clean.Furnaces, heat pumps, ductless systems and ventilation
Seattle homes run on a wide mix of equipment, and we adapt our approach to each. Gas furnaces. The most common system in older Seattle homes. Ducts typically run through a basement or crawlspace with floor registers upstairs. We take extra care with floor vents, which collect the most dropped debris. Heat pumps. Seattle’s push toward electric heating means many homes have converted to ducted heat pumps. A heat pump moves air for many hours at a lower speed, which makes clean ducts and a fresh filter important for efficiency and comfort. Ductless mini-splits. Ductless heads have no ductwork to clean, but their filters, coils and blower wheels still collect dust and buildup. Tell us what you have and we’ll tell you whether our service fits or whether you need an HVAC technician. Bathroom and kitchen exhaust. We can check accessible exhaust ducts that vent out through the roof or walls and tell you if any are blocked or disconnected.Duct materials and what they mean for cleaning
Not all ductwork is built the same. The material affects how we clean it and how much buildup it holds. Sheet metal. Galvanized steel ducts are the most common in older Seattle houses. They’re durable and handle brushing and air agitation well. Older metal ducts may have loose joints, gaps at the boots or sections sealed with tape that has dried out over time, and we’ll point those out. Flexible duct. Flex duct, a wire coil wrapped in plastic and insulation, is common in newer homes, additions and attic runs. Its ribbed inner surface traps more dust than smooth metal, and sharp bends or sagging sections restrict airflow. We use gentler tools on flex so we clean it without tearing the liner. If a run is crushed or kinked, we’ll show you so it can be replaced. Duct board and lined duct. Some systems use fiberglass duct board or metal duct with an internal liner. These surfaces need careful cleaning with the right tools. If the liner is deteriorating, cleaning can’t restore it, and we’ll recommend having an HVAC contractor assess it. Floor boots and register boxes. The connection between the duct and the register is often where gaps form and debris piles up. We pay attention to every boot as we work, especially in homes with floor registers.Buying or selling a home in Seattle?
Ductwork rarely makes it onto a home inspection checklist, but it’s one of the few systems that affects the air in every room. If you’re buying, a cleaning before you move in means you start with your own dust rather than the previous owner’s. That’s worth even more if they had pets, smoked or did their own renovations. Book it for the window between closing and move-in, when rooms are empty and every register is easy to reach. If you’re selling, a clean system is a small detail that buyers notice when the heat comes on during a showing. We can provide a short summary of the work to share with your agent.The best time of year to book
You can clean ducts any time of year, but a few windows are especially useful in the Seattle area:- Early fall, before the heating season starts, so the furnace or heat pump starts the season with a clean system.
- Late summer, after smoke season, to clear out ash and soot that settled during smoky weeks.
- Spring, after months of closed-up heating and before pollen season peaks.
- Right after a remodel, once construction cleanup is finished.
Indoor air quality beyond the ducts
Clean ducts are one piece of healthy indoor air. A few other habits make a big difference in a Pacific Northwest home: Control moisture. Run bathroom fans during and after showers, use the kitchen hood when cooking, and consider a dehumidifier in basements or damp rooms. Lower humidity makes it harder for musty odors to take hold. Ventilate when the air is clean. On clear days with good air quality, opening windows briefly refreshes indoor air. During smoke events, keep windows closed and rely on filtration. Add a portable air cleaner. A portable HEPA unit in a bedroom or living room gives extra protection during smoke season and pollen peaks. Keep the crawlspace healthy. A sound vapor barrier and good crawlspace ventilation keep damp air out of under-floor ductwork. Clean at the source. Regular vacuuming with a HEPA vacuum and washing pet bedding reduce what the returns pull in.Homes with wood stoves and fireplaces
Wood heat is popular across Western Washington, and it adds fine ash and smoke particles to indoor air, especially when the stove is loaded or the door is opened. Those particles can reach the returns and settle in the ductwork. If you burn wood regularly, plan on cleaning ducts a bit more often, keep your chimney swept so it drafts properly, and check the door gasket on your stove. We can do the duct cleaning and the chimney sweep in one visit.What you’ll see in your results review
When we finish, the technician goes over what we found and did, including:- the number of supply vents, returns and systems cleaned
- the condition of the ductwork, with any loose, damaged or disconnected sections we noticed
- the filter size we found and the replacement schedule we recommend
- any signs of moisture or other issues worth having an HVAC contractor check
Neighborhoods we serve in Seattle
We clean ducts across the city, including:- South Seattle: Rainier Beach, Columbia City, Mount Baker, Seward Park, Beacon Hill, Georgetown, South Park and Rainier Valley
- West Seattle: Alki, Admiral, Fauntleroy, Morgan Junction, Arbor Heights, Delridge and White Center
- Central Seattle: Capitol Hill, the Central District, Madrona, Leschi, Montlake and First Hill
- North Seattle: Ballard, Fremont, Wallingford, Green Lake, Phinney Ridge, Greenwood, Northgate, Lake City, Maple Leaf, Wedgwood and Ravenna
- Queen Anne and Magnolia, including the older homes on the slopes and bluffs
Nearby cities
We also serve Renton, Tukwila, Skyway, Burien, SeaTac, Kent, Des Moines and Normandy Park, plus other King County communities. Call (866) 902-6144 and we’ll confirm availability for your address.Uneven rooms and weak airflow
A common complaint we hear in Seattle homes is that one bedroom is always colder than the rest of the house in winter, or a bonus room over the garage never feels comfortable. Dirty ducts are only one possible cause, but they’re worth ruling out. Heavy buildup narrows a duct’s usable space, and debris that collects at a bend or a boot can choke airflow to the room at the end of the run. During cleaning, we compare airflow at the registers before and after. If a room still gets weak airflow afterward, the cause is usually something else, like a crushed flex duct in the attic, a closed or broken damper, a disconnected boot or a run that is simply too long or too small for the room. We’ll show you where we think the restriction is so an HVAC contractor can correct it. Either way, you’ll come away knowing more about why that room feels the way it does.Dryer vents: the duct most people forget
Your dryer has its own duct, and it’s a fire risk when it clogs. Lint builds up along the run, especially in long or winding vents that exit through the roof, which is common in Seattle townhomes. A clogged vent makes loads take longer and makes the dryer work harder. We clean the full length of the vent, clear the outside hood and check the airflow. Learn more about our dryer vent cleaning service, or add it to your duct cleaning when you book.Chimney and fireplace care
If your home also has a fireplace or wood stove, we can sweep and inspect it during the same visit. Combining services saves you a second appointment. See our Seattle chimney sweep page.What affects the price of duct cleaning
We give every customer a written price before we start. These factors shape that number:- Number of supply vents and returns. More openings mean more runs to clean.
- Number of systems. Homes with a second furnace, heat pump or zone take longer.
- Accessibility. Tight crawlspaces, finished basements and attic systems affect how we reach the ductwork.
- Level of buildup. Construction dust, years of pet hair or heavy debris require more passes.
- Add-ons. Dryer vent cleaning, chimney sweeping or ventilation-system cleaning.
How often should Seattle homeowners clean their ducts?
There’s no single rule, but these guidelines help:- Every few years for a typical home with regular filter changes and no special conditions.
- Sooner if you have pets that shed heavily, someone with allergies or asthma, a smoker in the home, or a wood stove or fireplace you use often.
- After a remodel, once the dust settles and before you move furniture back in.
- After a heavy smoke season, if you notice lingering odors or dust.
- When you move into a home where you don’t know the history.
Common myths about air duct cleaning
“If the vents look clean, the ducts are clean.” Register covers are the only part of the system most people see, and they’re the easiest part to wipe. Most debris sits farther back in the runs, the return side and the trunk lines. “A quick vacuum at each vent does the job.” A shop vacuum held at the register only reaches the first few inches. Real cleaning loosens debris along the full length of each run and pulls it out under continuous negative pressure. “Duct cleaning releases dust all over the house.” With proper containment and a strong collection system, the opposite happens. Air flows toward the collector, so dust is drawn out of the house, not into it. “New homes don’t need it.” Brand-new homes can have plenty of construction debris in their ducts, especially if the system ran while drywall was sanded and floors were finished. “Every home needs it every year.” Most don’t. Frequency depends on your home, your household and how well the filter is maintained. We’d rather earn a long-term customer than sell an unnecessary cleaning.When duct cleaning won’t solve the problem
Sometimes the issue isn’t dirty ducts, and we’ll say so:- Disconnected or crushed ducts in a crawlspace or attic can pull in insulation and dirt. They need repair.
- Water intrusion from a leak or condensation needs to be fixed at the source.
- A failing furnace or heat pump may cause weak airflow or odors. That’s a job for an HVAC technician.
- Poor filtration. If the filter doesn’t fit well or air bypasses it, debris will keep entering the ducts. We’ll recommend a better fit.
Preparing for your appointment
A little preparation helps the visit go smoothly:- Clear a path to the furnace or air handler and to the registers in each room.
- Move fragile items off shelves near vents.
- Let us know about pets so we can keep doors closed as needed.
- Have a replacement filter on hand if you’d like us to install it.
- If you live in a condo or townhome community, check whether the HOA has parking or work-hour rules.
Keeping your ducts clean afterward
- Change filters on schedule. Every one to three months is typical. Check more often during smoke season or heavy pollen.
- Choose the right filter. A pleated filter with a higher MERV rating catches finer particles, but confirm with your HVAC technician that your system can handle it.
- Vacuum registers and returns. A quick pass during your regular cleaning keeps buildup down.
- Run the fan during smoke events with a good filter in place and windows closed.
- Schedule HVAC maintenance yearly. A clean blower and coil keep the whole system healthier.
Households with pets
Seattle loves its dogs and cats, and our customers’ pets show up in their ductwork. Fur and dander get pulled toward return grilles, especially returns at floor level or near where pets sleep. Over months, that hair mats together with dust into thick layers that restrict airflow and hold odors. Cats that shed seasonally, double-coated dogs and homes with several animals see the fastest buildup. When we clean a pet household, we spend extra time on the returns and the return plenum, check the filter for bypass gaps and suggest a filter-change schedule that matches how much your pets shed. Between cleanings, vacuuming return grilles every couple of weeks and brushing pets outdoors when the weather allows go a long way. Let us know about your animals when you book so we can plan for them, and keep them in a closed room during the visit. The collection equipment is loud, and an open door slows the work.Townhomes, condos and multi-level homes
Seattle’s skinny, three- and four-story townhomes have their own quirks. The air handler often sits in a closet or the garage, ducts climb through several floors, and the dryer vent may run up to the roof. Stacked layouts mean long vertical runs where debris settles at every bend. We bring flexible tools long enough to reach the upper floors and plan the work floor by floor so we’re not tracking up and down your stairs more than we need to. For condos and apartments, we’ll work with your building manager on access, parking and elevator reservations. In buildings where each unit has its own fan coil or small air handler, we clean the ducts serving your unit and let you know if the equipment itself needs a separate HVAC service. Split-level and daylight-basement homes, which are common in West Seattle, Burien and Renton, often have a mix of floor and wall registers on different levels, plus long runs to the farthest bedrooms. Those far runs usually get the least airflow and collect the most dust, so they get extra passes.The tools behind a thorough cleaning
You don’t need to know our equipment to hire us, but here’s what’s doing the work in your home:- A high-powered collection unit that creates negative pressure across the system and captures the debris we loosen.
- Rotating brushes sized for different duct diameters to scrub the duct walls.
- Air whips and air skippers driven by compressed air that snake through runs and blast debris from corners and seams.
- Register seals and covers that keep the pull focused where we’re working.
Serving landlords and property managers
Rentals have their own needs. We can schedule around tenant turnovers, coordinate access with property managers, and provide a summary of the work for your records. Call to describe the property.Why choose Pro Chimney & Air
- Whole-system cleaning, including the returns, not only the vents you can see.
- Negative-pressure collection keeps dust contained while we work.
- Clear, written pricing before any work starts.
- Licensed and insured.
- Local to Seattle, close to the neighborhoods and cities we serve.
- One call for ducts, dryer vents and chimneys.